Interior Gateway Protocols
Figure 35: Route re-distribution
OSPF AS
Backbone Area
0.0.0.0
ABR
Area
121.2.3.4
ASBR
ASBR
RIP AS
EX_046
Configuring Route Re-Distribution
Exporting routes from one protocol to another, and from that protocol to the first one, are discreet
configuration functions. For example, to run OSPF and RIP simultaneously, you must first configure
both protocols and then verify the independent operation of each. Then you can configure the routes to
export from OSPF to RIP and the routes to export from RIP to OSPF. Likewise, for any other
combinations of protocols, you must separately configure each to export routes to the other.
194
ExtremeWare XOS 10.1 Concepts Guide