Configuration Examples; Pim-Dm Configuration Example - Extreme Networks ExtremeWare XOS Guide Manual

Configuration Examples

Figure 40 and Figure 41 are used in Chapter 13 to describe the OSPF configuration on a switch. Refer to
Chapter 13 for more information about configuring OSPF. In Figure 40, the system labeled IR1 is
configured for IP multicast routing, using PIM-DM. In Figure 41, the system labeled ABR1 is configured
for IP multicast routing using PIM-SM.

PIM-DM Configuration Example

Figure 40: IP multicast routing using PIM-DM configuration example
Area 0
Headquarters
ABR 2
160.26.25.1
160.26.25.2
Area 5
ExtremeWare XOS 10.1 Concepts Guide
IR 2
10.0.1.1
10.0.3.2
10.0.3.1
160.26.26.1
Virtual link
160.26.26.2
Chicago
10.0.1.2
10.0.2.2
ABR 1
10.0.2.1
161.48.2.2
161.48.2.1
Area 6 (stub)
Configuration Examples
IR 1
Los Angeles
EX_040
221