Extreme Networks ExtremeWare XOS Guide Manual page 210

Exterior Gateway Routing Protocols
enable bgp neighbor all
To configure router D, use the following commands:
create vlan db
configure vlan db add port 1
configure vlan db ipaddress 192.1.1.10/30
enable ipforwarding vlan db
configure ospf add vlan db area 0.0.0.0
create vlan de
configure vlan de add port 2
configure vlan de ipaddress 192.1.1.14/30
enable ipforwarding vlan de
configure ospf add vlan de area 0.0.0.0
disable bgp
configure bgp as-number 65002
configure bgp routerid 192.1.1.14
configure bgp confederation-id 200
enable bgp
create bgp neighbor 192.1.1.9 remote-AS-number 65001
create bgp neighbor 192.1.1.13 remote-AS-number 65002
configure bgp add confederation-peer sub-AS-number 65001
enable bgp neighbor all
To configure router E, use the following commands:
create vlan ed
configure vlan ed add port 1
configure vlan ed ipaddress 192.1.1.13/30
enable ipforwarding vlan ed
configure ospf add vlan ed area 0.0.0.0
disable bgp
configure bgp as-number 65002
configure bgp routerid 192.1.1.13
configure bgp confederation-id 200
enable bgp
create bgp neighbor 192.1.1.14 remote-AS-number 65002
enable bgp neighbor 192.1.1.14
210 ExtremeWare XOS 10.1 Concepts Guide