Deleting Devices And Device Groups From The Database; Deleting A Device - Extreme Networks EPICenter Reference Manual

3 To replace the modified device group in the database, click the Modify button at the bottom of the
window.

Deleting Devices and Device Groups from the Database

You must have an Administrator or Manager role to delete devices and device groups from the
EPICenter database. If you have a Monitor role, you cannot access this function.

Deleting a Device

You can begin the delete function using the Delete button on the toolbar, or by selecting a device in the
Component Tree, right-clicking to display the pop-up menu, and selecting Delete Device.
To delete a device from the EPICenter database, follow these steps:
1 Click the Delete button, or select Delete from the Inventory menu at the top of the Inventory
Manager main page.
Select the appropriate tab to display the Delete Devices window (see
Figure 33: Devices tab of the Delete Devices and Device Groups window
2 To select a device from a specific device group, select the device group from the pull-down list in the
Filter by Device Group field. Select All Devices to view the list of all devices from all device
groups.
3 Select one or more devices in the Devices list, and click Delete.
4 Click OK to confirm that you want to delete the device information from the database.
Deleting an online device removes the information about the device from the EPICenter database; the
device can no longer be monitored and managed from the EPICenter application. If the device is an
Extreme switch, deleting it removes any SmartTraps rules, both from the database and the switch
change table. It also removes all information about VLANs, QoS Policy, and Virtual Chassis connections
associated with this switch from the EPICenter database.
EPICenter Reference Guide
Deleting Devices and Device Groups from the Database
Figure 33).
79