Synchronize; Verify Eaps - Extreme Networks EPICenter Reference Manual

Synchronize

The Synchronize command goes to the network to update the status of the devices on the map, and
then updates the EAPS status of those devices and links. For a large number of managed devices, this
can take some time to complete.
The Synchronize command appears on the Tools Menu, as a button on the Viewport Toolbar, and on the
Map right-click pop-up menu.

Verify EAPS

The EPICenter EAPS application lets you verify the EAPS configurations in your network, and provides
a report that shows where configuration errors are found.
To run a verification on your EAPS domains, click Verify EAPS under the Tools menu. Depending
●
on the size of your network and your EAPS configurations, this can take as long as 15 minutes.
The results of the verification are shown in the EAPS Verification Results window.
Figure 236: EAPS Verification Results
The information shown in this report is as follows:
Table 45: EAPS Verification Results Report
Column
Type
Severity
EPICenter Reference Guide
The type of error. See Table 46
process may report.
The severity level of the error: Error, Warning, or Information
for a list of errors that the EAPS verification
The Tools Menu
463