Viewing And Modifying Qos Profiles - Extreme Networks EPICenter Reference Manual

Clicking Cancel at any time prior to clicking OK will restore the precedence settings to those
●
currently in effect relative to the selected policy.
Click the OK button to save the changes for the affected policies.
●

Viewing and Modifying QoS Profiles

QoS profiles cannot be added, deleted, or renamed. You can change the priority and bandwidths of each
of the eight profiles, QP1 through QP8, and configure your modified profiles on a selected set of
devices, or on individual ports on a device.
You cannot change the settings of the "blackhole" profile, which is set to priority "deny" and does not
use the minimum or maximum bandwidth settings.
Click the Configure QoS profiles button
the Policy System. This displays the Configure QoS Profiles window (see
The Configure QoS Profiles window is similar to the Edit Policy Endpoints window shown in
Figure 253 and discussed in detail
Figure 264: Configure QoS Profiles window
EPICenter Reference Guide
to view or change the current QoS profile definitions in
on page 490.
Viewing and Modifying QoS Profiles
Figure 264).
503