Extremeware Software Requirements; Tasks List Summary Window - Extreme Networks EPICenter Reference Manual

Using the IP/MAC Address Finder
The buttons at the top of the IP/MAC Address Finder applet provide the following functions:
Table 22: IP/MAC Address Finder Function Buttons
Up
Down
Find
Help

ExtremeWare Software Requirements

The IP/MAC AddressFinder applet requires certain versions of ExtremeWare to be running on your
Extreme switch in order to retrieve data from an IP address or MAC address search task.
Table 23 lists versions of ExtremeWare and whether or not they are currently supported by the IP/MAC
address applet.
Table 23: ExtremeWare Requirements for Using the IP/MAC Address Applet
ExtremeWare Version
6.1.5
6.1.6 through 6.1.9
6.2 and later

Tasks List Summary Window

When you click the Find IP/MAC button in the Navigation Toolbar, the main IP/MAC Address Finder
page is displayed as shown in
As search tasks are initiated, they are placed in the Find Address Tasks List in the Component Tree.
Selecting the Find Address Tasks folder in the Component Tree displays a summary of the status of the
tasks in the Task List (see
252
Moves the selection (focus) up in the Task Component Tree.
Moves the selection (focus) down in the Task Component Tree.
Displays the Find IP and MAC addresses window where you can specify a search task.
Displays the online Help for the IP/MAC Finder applet (same as the Applet Help command
from the Help menu).
Requirements
Not supported.
Supported using the using the dot1dTpFdbTable. Use the enable snmp
dot1dTpFdbTable command to enable the dot1dTpFdbTable on the switch.
Fully supported using a private MIB.
Figure 116. Initially there are no search requests displayed.
Figure 116).
EPICenter Reference Guide