Configure Mirroring Delete - Extreme Networks ExtremeWare Command Reference Manual

configure mirroring delete

configure mirroring delete [<mac_address> | vlan <vlan name> {ports
<portnumber>} | ports <portnumber> {vlan <vlan name>}]
Description
Deletes a particular mirroring filter definition on the switch.
Syntax Description
mac_address
vlan name
portnumber
Default
N/A
Usage Guidelines
On a modular switch,
explanation of port specification, see "Modular Switch Numerical Ranges" or "Stand-alone Switch
Numerical Ranges" in Chapter 1.
For version 6.0:
• No longer supports using a MAC address to specify mirroring.
Example
The following example deletes the mirroring filter on a stand-alone switch defined for port 1 on VLAN
default:
configure mirroring delete ports 1 vlan default
The following example deletes the mirroring filter on a modular switch defined for slot 3, port 2 on
VLAN default:
configure mirroring add ports 3:2 vlan default
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 4.0 to support modular switches.
This command was modified in ExtremeWare 6.0 to discontinue support for the MAC address
parameters.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
This command was modified in ExtremeWare 7.2e to add support for VLANs and MAC addresses.
ExtremeWare 7.7 Command Reference Guide
Specifies a MAC address. (Supported in versions 4.0 and 6.0 only)
Specifies a VLAN name.
NOTE: This parameter is only available on the "i" series of switches.
Specifies a port or slot and port.
must be a slot and port in the form
<portnumber>
configure mirroring delete
. For a detailed
<slot>:<port>
263