Step 1: Assembling The Speakers - Sony DAV-HDX275 Operating Instructions Manual

Step 1: Assemblingthe Speakers
(DA V-HDX475 only)
BeR_re connecting the speakers, attach the speaker stand to the speaker.
(For the ti"ont speakers)
Use the parts as IMlows:
Front speakers (2)
Speaker cords (2, red/white)
Posts (2)
Bases (2)
Mounting plates (2)
Post covers (2)
Screws (large, with washer) (4)
Screws (small) (6)
About how to connect the speaker cords to the SPEAKER jacks, see page 24.
• Spread a cloth on the floor to avoid damaging the floor when you assemble the speakers.
• You can use the speaker without the speaker stand by installing it on the wall (page 18).
1
Thread the speaker cord through the hole in the base and post.
The connector and color tube of the speaker cords are the same color as the label of the jacks to be
connected.
Use the speaker cords as l\_llows:
• Front speaker (L): White
• Front speaker (R): Red
Be cm'efid with the orientation of the post. Thread the speaker cord (and the speaker system cord)
into the end of the post that has two holes.
Speaker cord
Bottom of the base
Top of the base
Two holes
13G8