Step 4: Performing The Quick Setup - Sony DAV-HDX275 Operating Instructions Manual

Step4: Performing the
QuickSetup
Follow the Steps below to make the basic
adjustments li_r using tile system.
• When you connect the system and the TV with the
component video cord (not supplied) or HDMI cable
(not supplied), you need to set the type of video
output for matching your TV. For details, see "Setting
file type of video output to match your TV" (page 37).
I/(b
ill) i:? O
2
i
©
.... _ ............... DISPLAY
1
Turn on the TV.
2 Press I/@.
m
• Make sure that the fimction is set to "DVD"
(page 38).
3 Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ENTER] to run QUICK SETUP.]
appears at the bottom of the TV screen. If
this message does not appear, recall tile
Quick Setup display (page 36) and perli_)rm
again.
4
Press @ without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
i i!iii i!iiiiii iiii!i! 'ANGUAGESETUP
Press ,1,/4, to select a language.
The system displays the menu and subtitles
ill the selected language.
Press @.
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
Press ,t,/4, to select the setting that
matches your TV type.
• If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
116:91 (page 63)
• If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
(page 63)
Press @.
The Setup Display for selecting the speaker
R)rmation appears.
Press ÷/+ to select the speaker
formation image as the speakers are
actually positioned.
For details, see "Getting Optimal Surround
Sound R)r a Room" (page 83).
SPEAKER FORMATION
STANDARD
35G8