Sony DAV-HDX275 Operating Instructions Manual page 73

Usingthe Control for
HDMI Function for
"BRAVIA" Sync
This fimction is available on TVs with the
"BRAVIA" Sync function only.
By connecting Sony components that are
compatible with the Control for HDMI limction
with an HDMI cable (not supplied), operation is
simplified as below:
- Theater/Theatre Mode (page 74)
One-Touch Play (page 74)
System Power Off (page 75)
- System Audio Control (page 75)
- Volume Limit (page 75)
Control fbr HDMI is a mutual control lhnction
standard used by CEC (Consumer Electronics
Control) l\_r HDMI (High-Delhfition
Multimedia lmerluce).
The Control lot HDMI 5ruction will not work in
the IMlowing cases:
Wheu you connect this system to a
component which is not compatible with the
Control [br HDMI function.
A component does not have an HDMI jack.
There are convenient huttons on the system's
remote l\w operating the TV, such as
THEATER/THEATRE*, ONE-TOUCH
PLAY, TV I1(_). For details, see "Controlling the
TV with the Supplied Remote" (page 85) and
refer to the operafi ng instructions of the TV.
" The button nm_e diflL.rs depeMing on the area.
k BRAVIA Syn¢
m
• Depending on the connected component, the Control
lbr HDMI filnction may not work. Refer to the
operating instructions supplied with the component.
• The Control for HDMI function may not work if you
connect a component other than Sony, even if the
component is compatible with the Conlrol for HDMI
ffmction.
(Control for HDMI - Easy Setting)
The system is compatible with the Control for
HDMI - Easy Setting function. If ttle TV is
compatible with the Control lor HDMI - Easy
Setting function, you can set the system's
[CONTROL FOR HDMI] function
automatically by setting the TV. For details,
refer to the operating instructions of the TV.
If the TV is not compatible with the Control l\>r
HDMI - Easy Setting function, set the Control
tbr HDMI fimction of the system and TV
malmally.
tr_
• Displayed items vary depending on the country
modeh
1
Make sure that the system and the TV
are connected with an HDMI cable.
2
Turn on the TV and press I/(D to turn on
the system.
3 Switch the input selector on your TV so
that the signal from the system through
the HDMI input appears on the TV
screen.
4
Set the Control for HDMI function of the
system and TV.
For details of tl_e setting of the system, see
the %llowing Steps. For details of the
setting of the TV, rcllzr to the operating
instructions of the TV (depending on the
TV, the default setting of the Control for
HDMI function is set to o11").
O
O
,,,I
"1"
o
_e
m
rD
-l
e,
6'
o
rD
<
rD
73G8