Choosing An Audio Processor; Choosing An Audio Processor From The Remote - ProScan PS61670 User Manual

CHOOSING AN AUDIO PROCESSOR
Changing the audio processor changes the way your "IV sounds. There
are two ways to change the audio processor: a) from the Audio menu,
and b) by pressing SOUND on the remote. For more, see Audio menu
in the Quick Reference section.
Choosing an audio processor from the Audio menu
I. Press MENU to bring up the Main menu.
2. Press MENU again to select the Audio menu.
3. Point to Audio Processor and press MENU. The Audio Processor
choice list comes up, with the current mode highlighted.
4. Point to an audio processor mode and press MENU to select it and
return to the Audio menu. The options are:
Mono Plays the sound in mono only.
Stereo Splits the incoming stereo audio signal into left and right
channels.
SRSStereo (o) SRSis an audio processing technology that adds
greater depth and stereo separation to stereo audio signals.
Enhanced (.) SRSStereo Enhances the SRSsignal to give the
impression of even greaterdepth and stereo separation.
Sound Logic Stereo Sound Logic monitors a program's audio track
and limits the volume to a minimum and maximum volume range.
Whenever you adjustthe volume on the "i-V, t he minimum and
maximum _iolume rangeadjusts,too.
Second Audio Program (SAP) Plays the program's audio in a
seco{id language, if one is available. Settingthe audio processor to
SAP tells the TV to play the program's audio in this second
language, if one is available.
Choosing an audio processor from the remote
I. Press SOUND to display the audio processor choice list.
2. Point to and select a different audio processor or press CLEAR to
exit.
The number of audio processor choices
available depends on the type of signal
you are currently using. For example,
depending on the way you have your
VCR connected to the TV, the number of
choices is greater when you are watching
TV than when you are watching a video
tape.
fl