ProScan PS61670 User Manual page 50

(Channel Menu continued)
Auto Tuning Displays a choice list that lets you set up the TV to
automatically tune to the correct input channel when you pressa
component button (VCR1, DVD.VCR2, or SAT*CABLE).
Set VCR 1 Channel Displays a choice list that lets you select the
channel that the TV tunes to when you pressthe VCR1 button.
Set DVD.VCR 2 Channel Displays a choice list that lets you select
the channel that the TV tunes to when you pressthe DVD-VCR2
button.
Set SAT-Cable Channel Displays a choice list that lets you select
the channel that the TV tunes to when you pressthe SAT-CABLE
button.
The choices are:
Not Connected Choose this if you do not have a component
connected to an antenna or video input on the back of the TV, or if
you don't want the TV to tune to a channel when the particular
component button is pressed.
Channel 2 (SAT/Cable only) Choose this if your component is
connected to the antenna jack on the back of the TV, and you
want the TV to tune to channel 2 when you pressthe specified
component button. Reminder: Make sure the component's Ch 2/3/
4 switch is set to channel 2.
Channel 3 Choose this if your component is connected to the
antenna 'packon the back of the TV, and you want the TV to tune
to channel 3 when you press the specified component button.
Reminder: Make sure the components Ch 3/4 switch is set to
channe 3.
Channel 4 Choose this if your component isconnected to the
antenna jack on the back of the TV, and you want the TV to tune
to channel 4 when you press the specified component button.
Reminder: Make sure the component's Ch 3/4 switch is set to
channel 4.
Video 1 Input Choose this if your component is connected to the
Video 1 jacks on the back of the "IV and you want the TV to tune
to Video1 input when you press the specified component button.
Video 2 Input Choose this if your component is connected to the
Video 2 jacks on the back of the TV and you want the "IV to tune
to Video 2 input when you press the specified component button.
48