ProScan PS61670 User Manual page 21

NO
DO you have a cable box?
6. Select YES if you have a cable box, or NO if you do not.
CANCEL EXIT
Turn On cable box
Enter cable box brand # from
brand table in your manual
mm
7. Enter the code for your cable box's brand from the table on the
following pages.
When the TV GUIDE Plus+ system correctly identifies the brand and
model of your cable box, the cable box changes to channel 9.
NO EXIT
Testing code 1 2 - 0 1
%
Has your cable box
switched to channel 9?
8. Select YESif the cable box changed to channel 9, or NO if it did
not. If you select NO, the system will try another code.
Once the correct model of cable box has been identified, you will
need to set the cable box's output channel.
When the TV GUIDE Plus+ system
cannot recognize either your cable box
or VCR after several tries, a screen
reading, "Cable Box (VCR) test failed...
Please consult manual and try again"
appears. If this happens, you should:
• Double check the codes listed in the
tables. Try entering another if one is
listed.
• Check to make sure the IR
controllers are positioned correctly.
19