Set The Sat/Cable Channel - ProScan PS61670 User Manual

SET THE
SAT/CABLE
CHANNEL
The next step lets you set the SAT/CABLE channel. When you set the
SAT/CABLE channel, you're telling the TV what channel to tune to
when you press the SAT-CABLE button on the remote.
For example, if you have a cable box connected to the Antenna jack
on the back of the TV, and you usually tune your TV to channel 3 to
see cable stations, you want the TV to tune to channel 3 when you
press SAT,CABLE. If you don't have a satellite receiver or cable box
connected to the TV, skip this step or select Not Connected from the
SAT/CABLE Channel choice list. (For more, see Auto Tuning in the
Quick Reference section.)
1. Press MENU to bring up the SAT/CABLE choice list.
2,
3,
Point to the choice that matches the way you have your satellite
receiver or cable box connected to the TV.
If you used the Connections Foldout to hook up your TV, use the
table at the right to select the SAT/CABLE channel.
Press MENU to complete the Setup routine and return to TV
viewing.
26
Important:
If you have both a satellite receiver and a
cable box connected to the TV...
...The remote cannot control both a cable
box and the satellite receiver. The chart
details how to set the SAT-CABLE button
to control the satellite receiver. You must
then use your cable box remote to
control the cable box. You may, however,
prefer to use the satellite receiver remote
for satellite programming, and set your
SAT.CABLE button to control your cable
box. It's your choice.
If you used With Cable Box
Select
Connection A Channel 3*
Connection B Channel 3*
Connection C Channel 3*
Connection D Channel 3*
Connection E Channel 3*
If you used With Satellite
Receiver Select
Connection F Video 1 Input
Connection G Video I Input
Connection H Video 1 Input
Connection I Video 1 Input
* Or Channel 4, depending on how your
VCR's 3/4 switch is set.