Hoosing An Audio Processor - ProScan PS52690 User Manual

CHOOSING AN AUDIO PROCESSOR
Changing the audio processor changes the way your TV sounds. There
are two ways to change the audio processor: from the Audio menu or
by pressing SURROUND on the remote. For more information, see
Audio Menu.
Choosing an audio processor from the Audio Menu
1. Press MENU to bring up the Main Menu.
2. Press MENU again to select the Audio menu.
3. Point to Audio Processor.
4. Use the move arrows select an audio processor: Mono, Stereo,
Dolby 3, Pro Logic, Matrix Surround, and Hall Surround. These
options are described on page 40.
Choosing an audio processor from the remote
1. Press SURROUND to display the current audio processor mode on
the screen.
2. Press SURROUND repeatedly to toggle through the different audio
modes. The TV displays the name of the current audio processor
mode each time you press SURROUND.
The number of audio processor
choices available depends on the
speaker configuration you are
currently using. For example, you can
only use the Pro Logic audio processor
when you have left, right, center and
external rear speakers.
58