Connecting Your Tv; Tv Only; Tv With Other Components - ProScan PS61670 User Manual

STEP 1
Unpack the "IV. Make sure to locate the remote control and
Connections Foldout.
STEP 2:
CONNECTING YOUR TV
If you're only going to connect the TV to your home antenna or cable
system, use the "TV Only" connection. If you're going to connect the
TV to a VCR, satellite receiver, DVD player or other component, look at
the Connections Foldout. The Connections Foldout details
recommended connection schemesfor hooking up the TV to a cable
box or antenna, one or two VCRs, a laserdisc player, and a satellite
receiver.
TV ONLY
This is a basic connection from an antenna or cable systemto your TV.
Connect the cable as shown. If you have a VCR or other components
to connect to the TV, skip to the next section.
CABLE, CABLE BOX, OR ANTENNA
TV Only Connection
TV WITH OTHER COMPONENTS
Use the Connections Foldout to connect your TV to a VCR, DVD
player, and/or satellite receiver. After connecting your "iV and other
components, proceed to the next step. See AppendixA for detailed
information about using each of these connections.
If your components don't match those shown on the foldout, or if you
prefer a different connection, see your dealer or specific component
user manuals.
4