Table of Contents
Advertisement
ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tools, assembly requires an adjustable wrench o_1_
and a Phillips
screwdriver
_.
Use the part drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing is the key number of the part, from the PART LIST near the end of this manual. The number fol-
lowing the parentheses
is the quantity needed for assembly. Note: Some small parts may have been
preassembled.
If a part is not in the hardware kit, check to see if it has been preassembled.
If a part is
missing, call 1-888-533-1333.
M4 x 16ram
M6 Washer
M6 Locknut
M 10 Locknut
Screw (62)-10
(63)-4
(56)-4
(58)-2
M10 Split
Washer (48)-2
M6 x 18mm Patch
Screw (59)-2
M6 x 38mm Bolt
(55)-4
M6 x 42ram Patch
Screw (60)-2
1/4" x 38mm Patch
Screw (61)-4
MIO x 20mm Patch
Screw (54)-4
M10 x 36mm
Screw (57)-2
M10 x 64ram Patch
Screw (52)-3
MIO x 80mm Patch Screw (47)-2
5
Hide quick links:
Advertisement
Table of Contents
