Table of Contents
Advertisement
Using
Re @ e
To turn off all the
RCA, GE, and
PROSCAN
components
that are
connected
to the T_
press ON.OFF twice
within
two seconds
This feature
only
works with most RCA,
GE and PROSCAN
products.
ON,OFF
Turns the TV on and otT. When the remote is in another mode (VCR, DVD, Satellil% etc.)
and the remote is programmed
to operate
that component,
you can press ON,OFF
to turn the
component
on and ofT.
PAUSE If you're operating
a VCR or DVD Player with the remote control, press PAISE when the disc
or videotape
is playing to pause playback.
PIP (Picture-In-Picture)
Brings up the small Picture-In-Picture
window.
Press again to remove the
PIP window.
PLAY If you're operating
a VCR or DVD Player, plays the disc or videotape.
REC,VCR+
When the GUIDE Plus+ program
guide is on the screen, press REC,VCR+ lo program
your VCR to record a program. If the remote is in VCR mode, press REC,VCR+ to start recording.
RESET Resets original settings in several control panels.
REVERSE If you're operating
a VCR or DVD Player with the remote control, press REVERSE lo go
backwards
on a disc or videotape.
SAT,CABLE
Puts the remote in SKI'-CABLE mode.
If you set up the Auto Tuning I_ature (Chapter
3), pressing the SKF,CABLE buuon automatically
tunes the TV lo the correct channel.
SKIP
If you press this buuon bel_)re you change the channel,
the TV waits 30 seconds
and
automatically
goes back to the original channel. Each time you press SKIP, you add 30 seconds
(i.e, if
you press SKIP two times belbre you change the channel,
the TV wails
60
seconds
and automatically
turns back lo the original channel).
SOUND
Displays the AUDIO Iff._OCtfSSOR menu.
STOP If you're operating
a VCR or DVD Player, stops playing the disc or videotape.
SWAP Switches the main picture with the PIP window.
TV Turns on the TV and puts the remote in TV mode. Also displays channel inl_rmation.
VCR1 Puts the remote in VCR mode. If you set up the Aulo Tuning ll.ature (Chapter 3), pressing the
VCR1 button automatically
tunes the TV to the correct channel.
VCR2 Puts the remote in VCR mode. If you set up the Aulo Tuning ll.ature (Chapter
3), pressing the
VCR2 button automatically
tunes the TV to the correct channel.
VOL (lip and down)
borons
Decrease
or increase the TV's volume.
WHO-INPUT
In TV mode, press WHO-INP[
T to toggle through the available Video Input channels
(VIDiSVID and the current channel).
In SKF mode, press to select available
channel lists.
Using the WHO°INPUT
Button
Use the WHO,INPUT
button to toggle through the available input sources (VID and the current
channel)
and view the content l_com the component
you have connected
to the TV.
1.
Press TV to place the remol_, in TV mode. Make sure that the content l_comthe component
is
turned ON.
2.
Press WHO-INPI_ T to tune to the available input source and view the component.
3.
Press WHO-INPI_ T again lo tune back to the channel you were previously watching.
23
Advertisement
Table of Contents
Troubleshooting
