Table of Contents
Advertisement
MENU
Brings upthe
Main menu and selects highlighted
items. When in
VCR mode, it functions
as a PROGRAM button.
CLEAR Removes any menu or display from the screen and returns you
to TV viewing.
Also exits the GUIDE Plus+ Gold menu system.
(0-9) Number
Buttons
Enters channel numbers, digitsfor
programming
the remote,
and time settings directly though
the remote
control.
To enter a two-digit
channel,
press the two digits. To enter a
three-digit
channel, press and hold the first digit, release, then add the
second two. For example: to tune to channel
123, press and hold 1,
release, press 2, then press 3.
WHO.INPUT
In TV mode, press to toggle through
the available
input
sources (VIDI/SVID1,
VID2/SVID2, current channel).
In SAT mode, press to
select available
channel lists(RCA, PROSCAN,
and GE only).
ANTENNA
Functions as TV/VCR button
in VCR mode and TV/receiver
button
in SAT.CABLE mode.
REVERSE, PLAY, FORWARD,
REC*VCR+, STOP, PAUSE If programmed,
provides transport
control for some remote-controllable
VCRs, DVD
players, laserdisc players, tape decks, and CD players. Pressing REC.VCR+
when using the GUIDE Plus+ system sets the VCR to record a program.
PIP Brings up the small picture-in-picture
window.
Press again to
remove the PIP window.
If you have selected the option
labelled
Alternate
with PIPwhite
in the PIP Caption
Display
menu,
then you
will be able to toggle closed captioning
between
the main screen and
the PIP window
by pressing the PIP button.
SWAP
Swaps the main picture with the PIP window.
CH CTRL
Selects the picture window
(that is, the main or PIP window)
to be changed by the CH ^ (channel up), CH v (channel down), or
WHO.INPUT
buttons.
RESET Resets picture quality controls to the Bright Lighting
Picture
Control
Preset. Point and select to choose a different
Picture Control
Preset. Also used to reset the settings
in a menu, such as the Parental
Controls menu.
WHO.INPUT
DVb
VCR2
AUX SAC,CAbLE
&A°&&
_UTE
S_IP
©
©
SOUND
GO BACK
GUIDE
OO©O
Using
the
WHO.INPUT
Button
Use the WHO.INPUT
button
to toggle through
the available
input sources
and view the component
you have connected
to the TV.
1.
Press TV to place the remote in TV mode. Make sure that the
component
you want to view is turned on.
2.
Press WHO,INPUT
to tune to an available
input source.
3.
Continue
to press WHO,INPUT
to scroll through
the input sources.
Modes
of Operation
Because this universal
remote can control
several different
components
(DVD player,
VCR, Cable Box, etc.), it uses operational
modes triggered
by the component
buttons.
For example
if you want the
remote to control the TV, you would
press
the TV button
to put the remote into TV
mode before you could control the TV.
23
Advertisement
Table of Contents
