Table of Contents
Advertisement
@ her
Enf@rmat @n
Care and Cleaning
After Using the Camcorder
1.
S_'t th__ POWER switch to OFF.
2.
Close and lock the LCD monitor.
3.
Slide and hold the qAPE OPEN switch in tim direction of the arrow and open the
cassette holder cover. Remove the tape. Be careful not to touch the inside of the
cassette holder as you may hurt yourselE
4.
Push on the area marked PUSH. ['he cassette holder locks into place.
• Once the cassette holder is dosed,
it recedes
automatically.
Wait until it recedes
completely
bef\)re closing the cassette holder cover.
5.
Close the c{)ver until it firmly locks into place.
6.
Slide the I NLOCK switch, and remove the batte W pack.
7.
Roattad_ the lens cap.
Cleaning
the Camcorder
1.
2.
Clean the exterior, wiping gently with a soft cloth. For heavy dirt, use diluted, mild
soap and wring the cloth well. ['hen wipe again with a d W cloth.
Open the LCI) monitor
and wipe it gently with a sofi, d W cloth. Close it when
finished.
3.
'lk) clean the lens, blow it with air using a blower brush. Wipe gently with lens
cleaning
paper.
Notes:
Avoid using strong cleaning
agents such as alcohol.
Cleaning should
be done only after the power
supply has been disconnected,
Mold may form if the lens is left dirty.
When using a cleaner or chemically
treated
cloth, refer to the cautions
of each
product,
147
Advertisement
Table of Contents
