Maytag BRAVOS MGD6600TQ0 Use & Care Manual page 21

Steam Refresh Preset Cycle Settings
Timed Cycles Default Temperature* Default Time
Load Type (Minutes)*
RAPID REFRESH Small Load Medium 15
Helps to smooth out wrinkles and
reduce odors from loads consisting of
one to four dry items.
CUSTOM REFRESH Medium 20
Helps to smooth out wrinkles in loads
left in the dryer for an extended
period.
*]emperature and Timed Cycle Adjust are selectable only for the Custom Refresh Cycle.
NOTE: The Custom Refresh cycle has a minimum dry time of 15 minutes and a maximum
dry time of 40 minutes. Only the Medium and High temperature settings can be used for
the Custom Refresh cycle.
Timed Cycles
Use Timed Cycles to select a specific amount of drying time and a drying temperature. When
a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the cycle by pressing the Timed
Cycle Adjust up or down arrows. See "Changing Cycles, Modifiers and Options."
NOTE: Timed Cycles may also be used with the dryer rack. See "Drying Rack Option."
Timed Dry
Use this cycle to complete drying if items are still damp after a Sensor Dry Cycle. Timed Dry
is also useful for drying heavyweight and bulky items, such as bedspreads and work clothes.
[ightweight garments, such as exercise wear, can be dried using Timed [Dry on a low
temperature setting. Timed [Dry can also be used with the Drying Rack.
Timed Preset Cycle Settings
Timed Cycles Default Default Time
Load Type Temperature (Minutes)
TIMED DRY High 40
Heavyweight, bulky items, work
clothes
Sensor Dry Cycle Modifiers
Use the DRYNESS button to select dryness levels for the Sensor Dry Cycles. Press [DRYNESS
until the desired [Dryness setting illuminates.
The preset dryness setting is Normal when a Sensor [Dry Cycle is selected. You can select a
different dryness level, depending on your load, by pressing Dryness and choosing More,
Normal, I.ess or [::)amp. Selecting More, Normal, kess or Damp automatically adjusts the
dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed
without stopping the cycle.
•MORE
• _ESS
DRYNESS
NOTE: ]Dryness Level selections cannot be used with the Timed or Steam Cycles.
Timed Cycle Modifiers
Use the TEMPERATURE button to select temperatures for the Timed Cycles. Press TEMP until
the desired temperature setting illuminates.
• M I;IUM
• ow
• Xr_A LOW
FLUFF
TEMP
AD UST_IM_D
CYCLES
NOTE: ]emperature modifiers cannot be used with the Sensor Dry Cycles.
Air Fluff
Use the Air Fluff Modifier for items that require drying without heat such as rubber, plastic
and heat-sensitive fabrics. This table shows examples of items that can be dried using Air
Fluff.
Type of Load Time*
(Minutes)
20 - 30
Plastic - Shower curtains, tablecloths 20 - 30
Rubber-backed rugs 40 - 50
Olefin, polypropylene, sheer nylon 10 -20
*Reset cycle to complete drying, if needed.
When using Air Fluff
• Check that coverings are securely stitched.
• Shake and fluff pillows by hand periodically during the cycle.
• Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Air Fluff is not available with Sensor Dry Cycles.