Copying Your Tapes (Dubbing) - Panasonic Palmcorder PalmSight PV-L681 Operating Instructions Manual

Copying your Tapes (dubbing)
[l_.] !11[:tfi i[[.] i_
Source
(Playing)
Camcorder
Audio/Video
Out
Audio/Video
Cable
To Audio In
VHF Connecting
Cable
(not supplied)
To Video In
Before you begin...
• Make Camcorder°VCR connections (see left).
• Turn both units on.
• Set VCR input signal to LINE.
Please see VCR owner's manual.
• Set Camcorder POWER to VCR.
Insert a pre-recorded taoe
into Camcorder and a blank tape with
record tab into VCR.
Press PLAY on Camcorder, then press
STILL at starting point.
Press RE C, then STILL/PAUSE on
VCR.
Press STILL on Camcorder and STILL/
PAUSE on VCR to start copying.
Press STOP on both units to stop
copying.
Recording VCR
Note:
• Camcorder will only playback tapes
recorded in SP or SLP mode.
• Dubbing may reduce picture quality.
II Lvj [,7_-t i (,] ,=,,,A _, s,z,] q i iv
• Turn TV on and tune to VCR channel
(CH3 or CH4).
• Set TV/VCR Selector on VCR to VCR.
[_fCAUTION: ]
nauthorized exchanging and/or copying
copyrighted recordings may be
opyright infringement.
22