Panasonic Palmcorder PalmSight PV-L681 Operating Instructions Manual page 20

Playing Back Recordings
Before you begin...
• Connect Camcorder to power source.
• Insert tape recorded in SP mode,
• Set POWER to VCR.
Available only with SP recordings made
on this Palmcorder.
-1,2
1
During playback, press PLA__Y for
1/2 Slow Play mode. Audio is muted.
• Picture noise will
occur in 1/2 slow
play.
• If the recorded
speed changes
from SP to SLP,
normal speed
playback is resumed.
U2 SLOW
AUDIO IS MUTED
Press PLAY again to resume normal
speed playback.
Note:
• Vertical jitter may occur during playback.
• Skew may occur at top of picture.
ItF l E,.T;t 7
I Quick Visual Search J
Search Speed
• SP (Standard Play) : 3 times normal.
• SLP (Super Long Play) : 9 times normal.
During playback, press:
• F_F : fast forward search
• REW : rewind search
Press again or press PLAY for normal play.
I Still Picture ]
Press STILL to freeze picture.
Press again for normal play.
Note:
• During search, horizontal noise bars will appear.
Audio is muted.
• To protect video heads and tape, operating
modes will revert as follows after 5 minutes:
Still _ Stand-by
Stand-by-_. Power off (when Battery Pack is
used).
• Tape auto-rewinds if played or fast forwarded to end.
2O
[Auto Trackin 9 i
Continuously analyzes each recording for
optimum picture quality,
I Manual Tracking ]
Some recordings require manual
adjustment to reduce noise.
In Playback mode:
Press UP • or DOWN • until Playback picture
clears up.
Press DSP_ to return to Auto Tracking.
In Still mode:
Press UP • or DOWN• until Still picture clears up.
V-Lock Control
Reduces jitter in Still mode.
Hold down DISPLAY and U_ or DOWN •
until picture becomes stable.