Panasonic Palmcorder PalmSight PV-L681 Operating Instructions Manual page 17

Camera Recording
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 11).
REWI I FF I
\\ STOP/'/
b,c, a,
B AC D
d_
If left in RECORD/PAUSE mode for 5
minutes, Camcorder switches to Stand-
by mode to conserve battery. When set
to ON, Stand-by Quick Release lets
you resume recording by pressing
RECORD/PAUSE two times. Stand-By
Quick Release is set to OFF at the
factory.
Set POWER to CAMERA.
_. MENU PAGE 1/U1/_
Press MENU for_,_Eo _o,_,_
MENU mode. I_°_
Press UP • or Ic_c_ s_ [
r_t_tAakl • t [SELFCT: _JS_ "/A KEY /
U_ VlF i_l O SET : PU_ DI_LAY KEY
select _o :,u_ ....... _J
Press DISP_ to select ON/OFF.
ON : From Stand-by mode, press
RECORD/PAUSE two times
to resume recording.
OFF : From Stand-by mode,
set POWER to OFF, then to
CAMERA. Press RECORD/
PAUSE to record.
Press MENU to exit.
J _r_ _ ] i| I [: t i :_:.T..-_.rl : =r;li;_l i [,
For proper continuity when taping from Stop
mode or after attaching a new Battery.
A Set _POWER to VCR.
B_Press REWIND/SEARCH to rewind
a few seconds of tape.
(_Press PLAY to review recording.
(_Press STILL where you want to
continue recording.
C Set POWER to CAMERA.
O Press RECORD/PAUSE to resume
recording.
For a smooth transition between scenes if
recording is stopped, and then started
within 24 hours.
a Press RECORD/PAUSE to stop
recording.
b set POWER to OFF and leave
cassette in Camcorder.
C To resume recording, set POWER to
CAMERA.
d Press RECORD/PAUSE to resume
recording,
Note:
• Use Manual Easy Edit (left) if more than
24 hours before recording is resumed,
17