Table of Contents
Advertisement
Copying your Tapes (dubbing)
Connections
Source
(Playing)
Camcorder
Audio/Video
[—VHF Connecting
Cable
Cable
(supplied)
{not supplied)
Out
Recording VCR
Monitor with your TV
e Turn TV on and tune to VCR channel
(CH3 or CH4).
« Set TV/VCR Selector on VCR to VCR.
22
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts @panasonic.com
Before you begin...
* Make Camcorder-VCR connections (see left).
* Turn both units on.
* Set VCR input signal to LINE.
Please see VCR owner's manual.
* Set Camcorder POWER to VCR.
1 insert a pre-recorded tape
into Camcorder and a blank tape with
record tab into VCR.
2 Press PLAY on Camcorder, then press
STILL at starting point.
3 Press REC, then STILL/PAUSE on
VCR.
4 Press STILL on Camcorder and STILL/
PAUSE on VCR to start copying.
5 Press STOP on both units to stop
copying.
Note:
* Camcorder will only playback tapes
recorded in SP or SLP mode.
¢ Dubbing may reduce picture quality.
CAUTION:
Unauthorized exchanging and/or copying `
of copyrighted recordings may be
copyright infringement.
Advertisement
Table of Contents
