Copying Your Tapes (Dubbing).33 - Panasonic Palmcorder PalmSight PV-L50 Operating Instructions Manual

Copying your Tapes (dubbing)
Connections
(supplied)
Before you begin...
• Make Camcorder-VCR connections
(see left).
• Turn both units on.
• Set VCR input signal to LINE.
Please see VCR owner's manual.
• Set Camcorder POWER to VCR.
Insert a pre-recorded tape
into Camcorder and a blank tape with
record tab into VCR.
2
Press PLAY on Camcorder, then
press STILL at starting point.
3
Press REC, then STILL/PAUSE on
VCR.
4
Press STILL on Camcorder and
STILL/PAUSE on VCR again to start
copying.
5
Press STOP on both units to stop
copying.
Note:
• Camcorder will only playback tapes
recorded in SP or SLP mode.
• Dubbing may reduce picture quality.
Monitor with your
TV
• Turn TV on and tune to VCR
channel (CH3 or CH4).
• Set TV/VCR Selector on VCR to VCR.
>. CAUTION:-^
Unauthorized exchanging and/or
copying of copyrighted recordings may
be copyright infringement.
V_1_/