Copying Your Tapes (Dubbing) - Panasonic Palmcorder PalmSight Quasar VM-L451 Operating Instructions Manual

Copying your Tapes (dubbing)
CONMESIEnRS . ^ mas
Source
(Playing)
Camcorder
Audio/Video |—VHF Connecting
Cable Cable
(supplied) (not supplied)
Audio/
Video Out
e Turn TV on and tune to VCR channel
(CH3 or CH4).
e Set TV/VCR Selector on VCR to VCR.
Before you begin...
+ Make Camcorder-VCR connections (see left).
s Turn both units on.
* Set VCR input signal to LINE.
Please see VCR owner's manual.
« Set Camcorder POWER to VCR.
1 Insert a pre-recorded tape
into Camcorder and a blank tape with
record tab into VCR.
2 Press PLAY on Camcorder, then press
STILL at starting point.
g
ISE
O)
3 Press REC, then STILL/PAUSE on
VCR.
4 Press STILL on Camcorder and STILL/
PAUSE on VCR to start copying.
5 Press STOP on both units to stop
copying.
Note:
* Camcorder will only playback tapes
recorded in SP or SLP mode.
* Dubbing may reduce picture quality.
CAUTION:
Unauthorized exchanging and/or copying
of copyrighted recordings may be
copyright infringement.
19