Precautions - Panasonic Palmcorder IQ PV-D326 Operating Instructions Manual

This feature completely discharges the Battery beto_e recharging begins.
To maintain your battery's operating capacity, use the refresh feature after about every five charges.
CHARGE Lamp
Plug in AC Adaptor.
Place the Battery into
the AC Adaptor.
Press the BATTERY REFRESH
button.
The CHARGE Lamp will flash when
discharging begins and stop flashing
when fully discharged. POWER Lamp
will stay ht when fully charged.
Remove the Battery
• Should you accidentally press the BATTERY
REFRESH button, remove Battery and then
re-insert it to begin charging.
• It takes about seven and a half hours when
both Battery Refresh and charging are
ONLY FOR U.S.A. performed.
!,_._ ATTENTION: i
The product that you have purchased is powered by a rechargeable battery. The battery /
is recyclable. At the end of its useful life, under various state and local laws, it may be /
illegal to dispose of this battery into the municipal waste stream. Check with your local /
solid waste officials for details in your area for recycling options or proper disposal. _)
Caution:
• Charge only with specified charger.
• The Battery can be charged within a tempera-
ture range of 32 ° F (0 ° C) and 104 ° F (40 ° C).
• The Battery may be warm after charging or
just after use. This is normal.
• Do not use an insufficiently charged or worn
out Battery.
Safety precautions:
• Do not get the Battery near, or dispose of in
fi re.
• Do not directly connect (short circuit) the
positive (,+) and negative (-) terminals.
• Never attempt to disassemble or reassemble
the Battery.
8
To avoid damage to the Battery:
• Do not drop or jar the Battery.
• Use the Battery with specified units only.
• If the Battery is used in extremely high
temperatures, a safety device will automati-
cally prevent operation.
To insure longer battery life:
• While not in use, remove Battery from the
Palmcorder and AC Adaptor and store in a
cool, dark, dry place.
• Keep the Battery terminals clean.