Panasonic Palmcorder IQ PV-D326 Operating Instructions Manual page 32

Great for amateur surveillance applicatio_=_.
Before you begin...
• Connectthe Palmeorderto a power source.
For extended periods of recording, it is
recommendedto use the AC Adaptor for a
powersource.
• Insert a cassette with record tab (see page 10).
• Set the POWERswitch to CAMERA.
l ln Record/Pause mode, hold down
MOTION DETECT for 2 seconds
(approx.) to set the Palmcorder in
Motion Detection stand-by mode. (If no
cassette tape is inserted, "1_------I" will
flash.)
I Motion Detection may function
regardless of the subject's motion
when:
• the background is plain, suchas a
white wall.
• recordinga subjectwith distinct
horizontal, verticalor obliquestripes,
suchas a windowshade.
• the brightness suddenlychanges.
Motion Detection may not function
when..,
• motion is very slow or very fast.
• moving object is very small.
• motion is in 1 corner of the viewing
area.
• in low light situations (MOTION
DETECTION will flash if the light level
is inadequate.)
• the background has distinct horizontal
or vertical stripes.
• the background is plain, such as a
white wall.
32
MOTION
DETECTION
=l',_o.m,
• Palmcorder will start recording
approximately 3 seconds after it
perceives motion.
MOTION m° 1
DETECTION
• When motion ceases, recording will
stop 30 seconds later.
MOTION
DETECTION
_'rANo.6y
Press MOTION DETECT again to
cancel the M_tion E)etection feature.
Note:
• Make sure the Palmcorder is firmly
secure. If the Palmcorder is moved, the
Motion Detection feature will start,
regardless of the subject being recorded.
• While recording, Palmcorder will not be
set in Motion Detection stand-by mode.
• While Palmcorder is in motion detection
stand-by mode, Record/Pause, Stand-by
mode, Digital E.I.S., Color Digitat Fade,
One-Touch Auto Fade and Negative/
Positive Transposer can not be activated.