Panasonic Palmcorder IQ PV-D326 Operating Instructions Manual page 20

IL=-_'_ii_,l/F'Jt_,z,_x,!_-m Before you begin...
• Connect the Palmcorder to a power source.
• Insert a cassette with record tab (see page 10).
Tally Lamp 1 Set the POWER switch to CAMERA.
Built-In Lens Cover opens. EVF
• PAUSE1
Record/Pause
mode.
Ct
_lk _With the Viewfinder Eye Cup up to
your eye, adjust the Vision Adjust-
ment Control to your eyesight.
TAPE
EJECT
Underside View
(_ VisiOncontrolAdjustment
(PV-D326)
Slide the TAPE SPEED Selector
to SP or SLP (refer to page 10).
Note:
• Do not leave the Palmcorder with the EVF
aimed directly at the sun as this may cause
damage to the internal parts of the EVF.
\\\,
• When your Palmcorderis aimed at excessively
bright objects,or bright lights, a vertical bar
may appear in the picture. This is a normal
characteristic of the CCD pick-up device. Try
to avoid this when possible.
2O
_ ;Press RECORD/PAUSE
recording.
The Tally Lamp and RECORD/PAUSE
are lit during recording.
I RECORD
Press RECORD/PAUSE again to
recording.
Set the Power switch to OFF after
recording is finished.
• To remove the cassette
In Record/Pausemode,slide the TAPE EJECT
switch(,refer to page 10).