Panasonic Palmcorder IQ PV-D326 Operating Instructions Manual page 22

If you stop recording but plan to resume within 24 hours, use the Edit Standby feature to
make a smooth transition between scenes.
Set the POWER switch to OFF and leave
the cassette in the Palmcorder.
Set the POWER switch to CAMERA and
press RECORD/PAUSE (within 24
hours) to continue recording.
Note:
. If it is going to be longer than 24 hours before
you resume recording, use the manual Easy
POWER Switch Edit feature described below.
For proper continuity when taping from the Stop mode, or after changing the Battery
Pack.
1 Set the POWER
switch to VCR.
2(_) Press REWIND/SEARCH to go
back a few seconds on the tape.
(_ Press PLAY to review the picture
on the Viewfinder.
Press STILL at the location you
wish to continue your recording.
Set the POWER switch to CAMERA.
_ 4!Press RECORD/PAUSE to continue
recording.
22