Maytag MHW4200BW0 Use & Care Manual page 8

÷
CYCLEGUIDE
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best
fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.
NOTES:
III Not all cycles, temperatures, options, or spin speeds are available on all models.
III All wash temperature selections feature a cold rinse.
III Not all temperatures, spin speeds, or soil levels are labeled on the control panel.
_ems to wash
using default
cycle settings:
Wet load of clothes
Swimwear, items that
need rinsing
Clothing, bedding
and towels requiring
sanitization
Sturdy garments
and household items
exposed to possible
allergens
Heavily soiled fabrics
Cycle:
Drain
& Spin
Drain
& Spin
with
Extra Rinse
Sanitize _
Allergen _
Power
Wash
Wash
Temperature:
N/A
Extra Hot
Hot
Warm
Cool
Cold
Extra Hot
Extra Hot
Hot
Extra Hot
Hot
Warm
Cool
Cold
Spin Soil
Speed: Level:
Extra High N/A
Med
Low
Extra High Extra Heavy
Med Med
Low Light
Extra High Extra Heavy
Med Med
Low Light
Extra High Extra Heavy
Med Med
Light
Extra High Extra Heavy
Med Med
Low Light
Available
Options:
Fresh Spin"
Delay Start
Fresh Spin"
Delay Start
Steam for Stains*
Fresh Spin"
Extra Rinse
Delay Start
Steam for Stains*
Fresh Spin"
Extra Rinse
Delay Start
Steam for Stains*
Fresh Spin"
Extra Rinse
Delay Start
Use Drain & Spin to remove excess water from the load. Spin speed can
be set to a lower setting.
_ elect Drain & Spin; then select
Extra Rinse to add water. The
cycle includes an extra-high-speed
spin. For some fabrics, you may
wish to set the spin speed to a
lower setting.
Using the highest wash temperature
available ensures sanifizafion.
Check recommended wash
temperature of your items.
Uses more water to flush out allergens such as dust mites
and pet dander from normally-
soiled items.
Use this cycle for extremely soiled
garments and household items that
need additional cleaning power. This
cycle combines high-speed wash
action, extra-high-speed spin, and a
deep rinse to flush excess dirt from
the load.
* Steam for Stains option is only available when warm, hot, or extra hot water temperature is selected.
t- Sanitize
II This washer has a Sanitize Cycle that eliminates 99.90/0 of bacteria typically found on clothing, bedding, and towels, based on independent,
third-party laboratory testing. There is no carryover of bacteria between loads after the cycle is complete.
II Use the Sanitize Cycle to clean heavily soiled, colorfast fabrics. This combines an extra-hot water temperature to help ensure the removal
of heavy soils and stains. It is recommended that you set your hot water heater to 1 20°F (49°C) to ensure proper performance during this
cycle.
t-t- Allergen
Allergen cycle reduces allergens by at least 95.1% based on independent third-party laboratory testing. It is recommended that you set your
hot water heater to 12O°F (49°C) to ensure proper performance during this cycle.
8
÷