Table of Contents
Advertisement
From any menu or submenu, after 10 seconds of inactivity, the ISS saves all
adjustment settings and times out to the default LCD display cycle.
Video & Audio Configuration menu
Figure 3-11 is a flowchart that shows an overview of the Video & Audio
Configuration menu and the available settings.
Default
Cycle
Menu
10 sec.
Video & Audio
Configuration
Menu
Output
Configuration
Menu
Advanced
Configuration
Menu
User Presets
Menu
Exit Menu
Menu
Press Next to Exit
Next
Figure 3-11 — Video and Audio Configuration menu flowchart
Input Configuration submenu
Select an input to configure by pressing and releasing an input button. Rotate the
Adjust
knob while in the Input Configuration submenu to select the correct
video format (RGB, RGBcvS, YUVi, YUVp, Betacam 50, Betacam 60, HDTV, S-video,
or composite video) for the selected input. Rotate the Adjust knob to select the
audio gain or attenuation value, from -24 dB to +9 dB. The defaults for each input
are RGB video and a 0 dB audio level.
ISS 408 Integration Seamless Switcher • Operation
Next
Video/Audio Config
Next
Input #1 Composite
Menu
Audio #3 Level -12db
Input Configuration:
Select an input to configure
by pressing an Input button.
Rotate the
knob to select
the video type.
Input video type
• RGB
• Betacam 60
• RGBcvS
• HDTV
• YUVi
• S-video
• YUVp
• Composite
• Betacam 50
10 sec.
NOTE
The audio is broken
away in this example.
1
2
Input Configuration:
If necessary, select
another input and
1
repeat.
2
Rotate the knob to select
the audio level.
Input audio level
-24dB to +9dB
3-9
Advertisement
Table of Contents
