Goldstar RI000 Owner's Manual page 20

[] CABINET INSTALLATION
1, Open the window. Mark a line on center
of the window stool(or desired air
conditioner location),
Carefully place the cabinet on the
window stool and align the center mark
on the bottom front with the center line
marked in the window stool
2, Pull the bottom window sash down
behind the upper guide until it meets,
Do not pull the window sash down
so, tightly that the movement of
Frame Curtain is restrictS.
Front Angle
Window Sash
Foam-
Upper guide Q
Fig, 1
3, Looseiy assemble the sill support using
the parts in Fig. 3.
INDOOR _ i _ OUTD_R
i Support@
B
4, Select the position that will place the sill
support near the outer most point on sill
(See Fig. 4)
Be careful when you ins;tall the
cabinet (frame guides ,:1_t:: are
broken so easily),
5. Attach the sill support to the cabinet track
hole in relation to the selected position
using 2 Type A screws in each
support(See Fig. 4).
Screw(Type A) Q
Frame Guide4
\
I
Cabinet
INDOOR OUTD_R
Fig. 4