Additional controls and important information.
How to insert Batteries
Removethe_ver from the back of the remote
insert two batteries
. Be sure thatthe (+) and (-) directions ayecorr_t,
. Be sure th_ _th batteriesare new.
. Do not use rechargeablebatteries. Such
batteriesdiffer from standarddry cells in
shape, dimensions, and performance.
• Removethe b_eries from the remote
controller if the air _nditioner is not
going to be used for _ extended length
The ventilation lever must be in the CLOSE position in order to maintain the best cooling _nditions.
When fresh air isi necessary in the room, set the ventilation lever to the OPEN position.
The damper is opened and room air is drawn out.
Before using the ventilation feature,
position the lever, as shown. First, pull down
part _, to horizontal line with pad :%
The direction of air can be controlled wherever you want to
cool by adjusting the horizontal louver and the vertical
° HORIZONTAL AIR-DIRECTION CONTROL
To control horizontal direction of air flow, set to the ON
position the air-swing switch and the air flow wi!t be swept
horizontally by the automatic air-swing system.
If you want to stop the air flow from moving, switch off the
air swing switch at the desired position of the vane
• VERTICAL AIR-DIRECTION
by moving the