Goldstar RI000 Owner's Manual page 21

6. The cabinet should be installed with a very
slight tilt(about 1/2") downward toward the
outside (See Fig. 5).
Adjust the bolt and the nut of sill support for
balancing the cabinet.
7. Attach the cabinet to the window stool by
driving the screws ,:e:(Type B: Length
sixteen millimeters and below) through the
front angle into window stool,
8. Pull each Frame curtain fully to each window
sash track, and repeat step 2,
Screw(Type B) Q
track
Sill sup_rtQ
Front Angle
Screw(Ty_
B)_
9. A_ach each Frame curtain the window sash
using screws _b(Type C)
(See Fig. 6)
10. Slide the unit into the cabinet.(See Fig. 7)
CAUTION:
For security purp,ose_
reinstall screws(Type A) at cabinet's
sides.
Screw(Type A)
Power cord
Screw(Type A)