Panasonic Digital Plamcorder PV-DV901 Manual page 52

• Manual Shutter Speed Adjustment (4 24)
• You may see vertical lines of light in the playback image of
a brightly shining subject or highly rellective subject.
=During Normal Playback, transition from one scene to
another may not look smooth.
*Because the color and brightness of the playback image
may become unstable, avoid recording under fluorescent
light, mercury light, or sodium light.
• If you are using either Gain-up Mode or Program AE Mode,
you cannot adjust the shutter speed, It the shutter speed is
adjusted manually, this setting wilt be cancelled.
• Manua! Iris Adjustment (4 24)
• Depending on zoom magnification, the iris value may not
be displayed correctly.
• If you are using either Gain-up Mode or Program AE Mode,
you cannot adjust the iris. If the iris is adjusted manually,
those Modes will be cancelled.
• White Balance (-_ 25)
• You cannot change White Balance if you set [EFFECT1] of
[DIGITAL EFFECT] Sub-Menu on the [CAMERA
FUNCTIONS] Main-Menu to [GAIN-UP] or [EFFECT2] I•
[SEPIA] or to [MONO].
• In addition, when you set the Zoom to 10 x or higher, you
cannot change White Balance.
In the following cases, the [_•L] Indication flashes:
• The flashing indicates that the previously adjusted White
Balance setting is still kept. This setting will be kept until
White Balance is adjusted again.
• You may not be able to achieve correct White Balance
adjustment manually under weak illumination.
• Digital Effect Functions (Camera Mode)
(4 26)
• If you set [EFFECT1] on [DIGITAL EFFECT] Sub-Menu to
[GAIN-UP], you need to adjust the focus manually.
However, you cannot adjust the shutter speed and iris and
cannot select White Balance.
• If [EFFECT2] on the [DIGITAL EFFECT] Sub-Menu is set
to [MONO] or [SEPIA], the selected White Balance Mode
cannot be changed.
• You cannot use Program AE with Gain-up Mode [GAIN-
UP].
• When [PROGRESSIVE] on the [CAMERA SETUP] Sub-
Menu is set to [ON], it is not possible to use any of the
digital modes in [EFFECT1] on the [DIGITAL EFFECT]
Sub-Menu,
• Wipe Mode and Mix Mode (Camera Mode)
(4 26)
If either one of the following operations is carried out, stored
images will be erased, and Wipe and Mix Functions cannot
be used.
• Use the Camera Search Function
• Press the [CAMERA STILL] Button
• Switch the [TAPE]CARD] Selector.
• M ulti-Picture Mode (Camera Mode) (-_ 27)
• When [PROGRESSIVE] on the [CAMERA SETUP] Sub-
Menu is [ON], Multi Mode cannot be used,
_, If the [MULTI] Button is pressed while self-recording Mirror
mode (-) 20) is used, the still picture is displayed from the
upper right comer of the screen, but, in reality, the picture
is recorded from the upper left corner as usual.
• The quality of images recorded in Multi Mode deteriorates
slightly.
• Multi Mode cannot be used in stiff picture mode or when
mega-pixel recording is set,
iP-IN-P Mode (-._27)
• Pictures in P-IN-P Mode cannot be recorded with
Progressive PhotoShot,
• If the Pal•corder power is turned off, the smaller picture
will disappear.
• A title cannot be inserted into the smaller picture,
• If the [CAMERA STfLL] Button is pressed in P-IN-P Mode,
the setting is cancelled.
• Index Search Functions (-4,30)
• Index Search may not be possible atthe beginning of tape.
• Because Photoshot Index Signals are not recorded on still
pictures recorded in Continuous Photoshot Mode, the
Photoshot Index Function cannot be used for these stLII
pictures.
• Scene Index Search may not function properly if the
interval between 2 scene index signals is shorter than 1
minute.
iPlayback Zoom Functions (_
31)
• You cannot adjust volume in Playback Zoom Mode.
• If you turn off the Palmcerder or if you switch from VCR
Mode to Camera Mode, Playback Zoom Mode is
automatically cancelled.
• Even if Playback Zoom Functions are being used, images
that are output from the DV Terminal or Digital Still Picture
Terminal are not enlarged.
• As you enlarge an image, the qualily of image suffers.
• You cannot use the Mirror Mode of Digital Effects and the
Playback Zoom Functions simultaneously.
• If you select Multi-Picture Mode in the Playback Zoom
Mode, equivalent magnification (1 X) becomes zoom
magnification.
iPlayback Digital Effect Functions (4 31)
* Signals of images to which digital effects are added during
playback cannot be output from the DV Terminal or Digital
Still Picture Terminal.
4,You cannot use the Wipe or Mix Function while playing
back the non-recorded portion of tape,
• You cannot use the Mirror Mode of Digital Effects and the
Playback Zoom Function simultaneously.
iMulti Picture Mode (VCR Mode) (.,P 32)
• The quality of Multi images deteriorates slightly,
• Playback multi-mode screens cannot be output through DV
Terminal or Digital Still Picture Terminal,
• If there is input from DV Terminal, a multi screen cannot be
created.
• When signals are input from Video Input/Output Jack or
Audio-Video Input/Output Jack, a multi screen cannot be
re-displayed.
• Signals input from Video Input/Output Jack or Audio-Video
input/Output Jack cannot be displayed on a multi screen.