Using The Menu Screen - Panasonic Digital Plamcorder PV-DV901 Manual

, 3, 4, 5
O
t, CAMERA SETUP
_,DtGITAL EFFECT
3 CARD SETUP
4, MULTI=PICTURES
_,RECORD_NG _ETUP
_,DISPLAY SETUP
LOTH_q FUNCTIONS,,
e
t. PLAYEACK FUHCTtOHE
_._IGtTAL EFFECT
_CA_O SETUP
_MULTI-PJCTUREE
t,_ECORDING EETgP
_AV IN/OUT _ETUP
7DISPLAY SETUP
JkOTHER FUNCTIONS
= !
e
t, OELETE PICTURE/TItLE
2. CARO EOIT_NG
_.DISPLAY SETUP
_,OTHER FUNCTIONS
Using the Menu Screen
To facilitate the selection of a desired function or setting, this Palmcorder
displays various function settings on menus.
1 Pressthe [MENU] Button.
eWhen the [CAMERA] Lamp is on, the Camera Function Menu is
displayed. 0
eWhen the [VCR] Lamp is on, the VCR Function Menu is displayed•
==When the [CARD P.B.] Lamp is on, the Card Function Menu {s
displayed. _)
2 Rotate the [PUSH] Dial to select a desired Sub-Menu.
• Rotate the [PUSH] dial to display the items highlighted.
3 Press the [PUSH] Dial to display the selected Sub-Menu.
4 Rotate the [PUSH] Dial to select the item to be set.
5 Press the [PUSH] Dial to set the selected item to a desired
Mode,
• Each press of the cursor [I_ ] brings up a subsequent Mode. Menu items
that cannot be used in combination with the seJected item are displayed
in dark blue.
• While a Menu is displayed, you cannot record or play back. Menus can be
displayed during playback but not during recording.
• The above operations can be carried out using the Remote Controller,
(4 10)
eTo display the Menu, press the [MENU] Button _]) on the Remote
Controller. " " " :
eTo selectitems on the Menu, press the[ITEM] Button_ on the Remote
Controller.
eTo set the mode for the selected items, press the [SET] Button _ on the
Remote Controller.
To Exit the Menu Screen
Press the [MENU] Button again•
About the Menu Mode Setting
The.setting selected on the Menu wilt be retained even when the Palmcorder
is turned off. However, ff the Battery or AC Adaptor is disconnecte d before
Turning the Palmcorder olf, the selected setting may not be retained.
15