Panasonic Digital Plamcorder PV-DV901 Manual page 40

2, 4, 5
IS-V_DEO IN) (_)
ilk
I [VIDEO IN)
IS-VIDEO OUTI
IV_DEO
OUTI _ )'_
[AUDIO OUT](_)
Copying your DV Cassette to an S-VHS or VHS
Cassette [Dubbing)
After connecting the Palmcorder and the S-Video, Video end Audio
Input Jacks ® of the VCR as illustrated on the left, start the following
procedures.
• Be sure to press the [OSD] Button on the Remote Controller before copying
so that no indications are left visible. Otherwise, the displayed tape counter
and Function indications are also copied.
[Palmcorder]
1 Insert the recorded Cassette,
[VCR]
2 Insert a blank Cassette with an erasure prevention tab.
• If various settings (such as external input, tape speed, etc.) are
required, please refer to the operating instruction of your VCR.
[Palmcorder]
3 Press the riP] Button to start playback.
[VCR]
4 Start recording.
5 Press the Pause or Stop Button to stop recording.
[Palmcorder]
6 Press the [111]Button to stop playback.
0 S-VHS Cable (not supplied) 0 A/V Cable (supplied)
Copying an S-vile or VHS Cassette to your DV
Cassette
After connecting the Palmcorder and the S-Video, Video, Audio Output
Jacks _) of the other equipment as illustrated on the left, start the
following procedures.
• You need the Remote Controller.
[Palmcorder]
11 Set [VCR FUNCTIONS] >> [AV INIOUT SETUP] >> [AV JACK]
>> [INtOUT].
Insert an blank Cassette with an erasure prevention tab.
[Other Equipment]
3 Insert a recorded Cassette and start playback.
[Palmcorder]
4 While pressing the [REC] Button, press the [PLAY] Button
(Both buttons are located on the Remote Controller.)
_i Press the [11] Button or re] Button to stop recording.
[Other Equipment]
Press the Stop Button to stop playback.
0 S-VHS Cable (not supplied) 0 AN Cable (supplied)
IIAnalog-Digital Conversion
When the Palmcorder is connected with other digital video equipment
through its DV Terminal, the analog format pictures which have been input
from other external equipment can be output to the digital video equipment
through the DV Terminal.
• To DV-output analog video signals sent from other equipment, set [DV
OUT] on the [AV IN!OUT SETUP] Sub-Menu to [ON]. (NormaJly, keep the
[DV OUT] set to [OFF]. If it is set to [ON], the quality of the image may be
disturbed.)
.............. , ....................................... , .................... .... ,.., ,, ,, • H °°.° °*....,....., ,, ,.° ........ ,
CAUTION:
Unauthorized exchanging and/or copying of copyrighted recordings may be
copyright infringement.
,°,, .......... , .............................................. ..,..,÷,÷,,,.**,..° ....... .,,°..°,, ...................... ,
e Please refer to "Recording to a Card from ether equipment" (4 53),
regarding the recording to a Card.
4O