Manual Shutter Speed Adjustment; Manual Iris Adjustment (F Number); Manual Focus Adjustment - Panasonic Digital Plamcorder PV-DV901 Manual

2_ 3 "m_
Manual Shutter Speed Adjustment
Useful for Recording fast-moving subjects
1
Set the Mode Selector Switch to [MANUAL],
=,The [MNL] Indication appears.
2 Press the [PUSH] Dial repeatedly until the shutter speed
display appears.
3 Rotate the [PUSH] Dial to adjust the shutter speed.
The Range of Shutter Speed Adjustment
1/60-1/8000 (or t/30-1/500: for Mega Pixel Recording)
The standard shutter speed is 1/60 (or 1130: for Mega Pixel Recording).
'Selecting a speed closer to [1/8000] causes the shutter speed to be faster,
• When the progressive function is [ON], a speed only up to 1/500 can be
used.
To Resume Automatic Adjustment
Set the Mode Selector Switch to [AUTO].
• For other notes, see page 52.
..LI
I_F2.4
Manual Iris Adjustment (F Number)
You can use this function when the screen is too bright or too dark.
1 Set the Mode Selector Switch to [MANUAL].
• The [MNL] Indication appears.
2 Press the [PUSH] Dial repeatedly untilthe [F] Indication
appears.
3 Rotate the [PUSH] Dial to adjust the iris.
Adjustable Range of the Iris
CLOSE (Closed)--* F16...F2.O--+
OP (Opened)+Od B--> OP+3d B...--*OP+ 18dB
When a value closer to [CLOSE] is selected, the image becomes darker,
When a value closer to [OP+18dB] is selected, the image becomes brighter.
The vafue to which +dB is attached indicates a gain value. It this value is too
large, the quality of the image deteriorates.
To Resume Automatic Adjustment
Set the Mode Selector Switch to [AUTO]..
• For other notes, see page 52_
3
O
MNL MF 1
Manual Focus Adjustment
Focus can be adjusted manually for recording in a situation where auto focus
may not function well.
1 Set the Mode Selector Switch to [MANUAL].
• The [MNL] Indication appears.
2 Pressthe [FOCUS] Button.
• The [MF] Indication (Manual Focus Mode) O appears.
3 Rotate the Focus Ring to adjust the focus.
To Resume Automatic Adjustment
Press the [FOCUS] Button to turn off the [MF] Indication. Or, set the Mode
Selector Switch to [AUTO],
24