Playback Zoom Function; Playback Digital Effect Functions - Panasonic Digital Plamcorder PV-DV901 Manual

.
2-
Q-
Playback Zoom Function
A part of the image can be enlarged up to 10 times during playback.
1 During playback, press the Playback Zoom Button [P.B.
ZOOM] on the Remote Controller.
• The center of the image is enlarged to approximately double the size.
Changing the Zoom Magnification
2 Change the magnification by pressing the [W] or IT} Button
on the Remote Controller.
• You can increase the magnification up to t0×+
Changing the enlarged area of an image
3
Press the Arrow Button (A, <[, _, Y) on the Remote
controller that points to the area you want to enlarge.
• When the playback is stopped, the position of the enlarged image area
is reset to the center automatically,
Canceling the Playback Zooming Function
Press the [P.B.ZOOM] Button on the Remote Contro{ler,
• For other notes, see page 52.
Playback Digital Effect Functions
During playback, special Digital Effects can be added to the Recording. The
digital effects that may be applied in the process of recording (except Picture
in Picture Mode) w{Itbe the same as these added effects.
1 Press the Play Button [b,.].
2 Press the [SELECT] Button of the Remote Controller and
select desired Digital Effect +
=,When the [SELECT] Button is pressed repeatedly, the Digital Effect
selection changes,
MULTI --_ WIPE--, MIX--_STROBE .-_ N EGA-.*SEPIA-_ MONO
--.TRAIL--.-. SOLARI ..-..MOSAIC--* MIRROR
• The same setting can also be set using the [DIGITAL EFFECT] on the
[VCR FUNCTIONS] Main+Menu,
Suspending Playback Digital Effect temporarily
Press the [OFF/ON} Button (_) to clear or restart the digital effect. When the
Digital effect is paused temporarily, the selected effeet's indication flashes.
Canceling the Digital Effect
Press the [SELECT] Button on the Remote Controller repeatedly until the
Digital Effect Indication is cleared,
• For other notes, see page 52.
iPlayback with Wipe Mode and Mix Mode
1 Press the [1_] Button to start playback.
2 Press the [SELECT] Button of the Remote Controller and
select [WIPE} or [MIX}.
3 Press the [STORE] Button at the moment you want to save
as a still picture,
oThe [_rJF'J"=l] or [_'1_1}Indication appears, and the image is saved.
4 Press the [OFF/ON} Button in the scene in which you want to
use the Wipe or Mix effect.
• The scene changes as a result of the Wipe or Mix effect.
+ The Wipe Function and Mix Function can be used only from the Remote
Controller during playback.
• If the [OFF/ON} Button is pressed while Wipe Function or Mix is used, the
effect will stop temporarily at that point. Pressing the [OFF/ON} Button again
wilt bring back the etfect.
31