Specifications - Extron electronics IPL T SF24 Series User Manual

Specifications, Part Numbers, Accessories, cont'd

Specifications

Ethernet control interface
Connectors .................................... 1 RJ-45 male connector
Data rate ........................................ 10/100Base-T, half/full duplex with
Protocols ........................................ ARP, DHCP, ICMP (ping), TCP/IP,
Default settings ............................ Link speed and duplex level =
Serial control interface
Port number/type
IPL T SF24 ......................... 2 RS-232/RS-422/RS-485 configurable
IPL T SFI244 ...................... 2 RS-232 only
Connectors
IPL T SF24 ......................... (2) 9-pin male D and
IPL T SFI244 ...................... (1) 3.5 mm 5-pole captive screw connector
Baud rate and protocol ............... 300 to 115200 baud
Pin configurations
Serial, 9-pin D
RS-232 (default) ........ 2 = RX, 3 = TX, 5 = GND, 7 = RTS, 8 = CTS
RS-422 ........................ 2 = RX-, 3 = TX-, 5 = GND, 7 = TX+, 8 =
RS-485 ........................ 2&3 = data- and tie 2&3, 5 = GND,
Serial, 5-pole captive screw
Flex I/O control interface
Number/type ............................... 4 analog or digital (configurable)
Connectors .................................... (1) 3.5 mm captive screw connectors,
A-2 IPL T SF24, IPL T SFI244 • Specifications, Part #s, Accessories
autodetect
Telnet, HTTP, SMTP
autodetected
IP address = 192.168.254.254,
subnet mask = 255.255.0.0,
default gateway = 0.0.0.0
DHCP = off
serial
(1) 3.5 mm 10-pole captive screw
connector
Default settings (adjustable): 9600, 8-bit,
1 stop bit, no parity
RX+
7&8 = data+ and tie 7&8
COM1: pin 1 = TX, 2 = RX, 3 = GND
COM2: pin 4 = TX, 5 = RX, 3 = GND
5 pole
Digital inputs
Input voltage range ......... 0-24VDC, clamped at +30VDC
Input impedance .............. 28 kohms
Programmable pullup ..... 2 kohms to +5VDC
Threshold low to high .... Programmable range: 100 mV to 24VDC,
Threshold high to low .... Programmable range: 100 mV to 24VDC,
Digital outputs ............................. 250 mA sink from 24VDC max.
Analog inputs ............................... 12 bit A/D, 0 to 24VDC
Pin configurations ....................... 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = GND
IR/serial (IR/S) control interface — IPL T SFI244 only
Output port number .................... 4
Connectors .................................... (1) 3.5 mm 8-pole captive screw connector
IR output carrier frequency ........ 30 kHz to 1 MHz
Pin configurations ....................... pins 1, 3, 5, 7 = S 1, S2,S 3,S 4
General
Power ............................................. 100VAC to 240VAC, 50/60 Hz, 10 watts,
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) /
Rack mount ................................... Yes, with optional 1U rack shelf, part
Enclosure type .............................. Metal
Enclosure dimensions ................. 1.7" H x 4.3" W x 3.0" D
Product weight ............................. 0.7 lbs (0.3 kg)
Shipping weight .......................... 2 lbs (1 kg)
IPL T SF24, IPL T SFI244 • Specifications, Part #s, Accessories
default = 2VDC
default = 1VDC
pins 2, 4, 6, 8 = GND
external, autoswitchable; to 12VDC, 1 A
power supply. Product requires 0.5 A.
Alternatively, the product can use power
supplied over LAN/Ethernet (802.3af,
class 2).
10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
#60-190-01, or the VersaTools rack shelf,
part #60-190-20;
also under-furniture mountable with
optional brackets #70-212-01
or projector mountable with optional
brackets #70-217-01/70-077-04
(1U high, quarter rack width)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
A-3