Specifications; Optical Specifications - Extron electronics FOX SW8 User Manual

Specifications

Optical Specifications

NOTE: These switchers are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21
CFR 1040.10, and FDA 21 CFR 1040.11.
Number/type
Input ................................ 8 singlemode or multimode fiber optic
Output ............................. 1 singlemode or multimode fiber optic with 7 loop throughs for inputs 1-7
Connectors ................................. 8 LC connectors
Operating distance
Singlemode ...................... 30 km (18.75 miles) with singlemode (SM) cables with an Extron singlemode Tx/Rx unit
Multimode.......................... 300 m (985') with 62.5 µm multimode (MM) cables with an Extron multimode Tx/Rx unit
NOTE:
Operating distance is approximate. These are typical distances. The maximum distance may be
greater than these typical numbers depending on factors such as fiber type, fiber bandwidth,
connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength ........... 850 nm for MM model,
Data rate ..................................... 4.25 Gbps
Transmission power
Singlemode ...................... -5 dBm, typical
Multimode ....................... -5 dBm, typical
Maximum receiver sensitivity
Singlemode ...................... -18 dBm, typical
Multimode ....................... -12 dBm, typical
Optical loss budget
Singlemode ...................... 13 dB, maximum
Multimode ....................... 7 dB, maximum
1 km (3280') with 50 µm multimode (MM) cables with an Extron multimode Tx/Rx unit
2 km (6561') with 50 µm 2000 MHz bandwidth laser multimode cable with an Extron
multimode Tx/Rx unit
1310 nm for SM model
Extron FOX SW8 • Specifications 19