Replacing The System Board - Dell Inspiron Zino Service Manual

17. Lift the system board away from the computer.
1 system board
Replacing the System Board
1. Follow the procedures in Before You
2. Align the connectors on the system board with the slots on the chassis and slide the system board in place.
3. Replace the four screws that secure the system board to the chassis.
4. For Inspiron 400 Only:
a. Replace the graphics-card fan (see
b. Replace the graphics card (see
c. Replace the graphics-card heat sink (see
d. Replace the processor (see
e. Replace the processor heat sink (see
f. Replace the Mini-Card (see
5. Connect all the cables to the system board.
6. Replace the memory module(s) (see
7. Replace the I/O bracket (see
8. Replace the chassis fan (see
9. Replace the I/O bezel (see Replacing the I/O
10. Replace the coin-cell battery (see
11. Replace the drive bay (see Replacing the Drive
12. Replace the optical drive (see
13. Replace the bottom cover (see
14. Replace the top bracket (see
15. Replace the top cover (see
2 screws (4)
Begin.
Replacing the Graphics-Card
Replacing the Graphics
Replacing the Graphics-Card Heat
Replacing the Processor).
Replacing the Processor Heat
Replacing the Mini-Card).
Memory Module(s)).
Replacing the I/O Bracket).
Replacing the Chassis Fan).
Bezel).
Replacing the Coin-Cell Battery).
Bay).
Replacing the Optical Drive).
Replacing the Bottom Cover).
Replacing the Top Bracket).
Replacing the Top Cover).
Fan).
Card).
Sink).
Sink).