Table of Contents
Advertisement
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
16. Turn on the computer.
NOTE:
After you have replaced the system board, enter the computer's Service Tag into the BIOS of the replacement system board.
17. Enter the Service Tag (see
Entering the Service Tag in the
Entering the Service Tag in the BIOS
1. Turn on the computer.
2. Press <F2> during POST to enter the system setup program.
3. Navigate to the main tab and enter the service tag in the Service Tag Setting field.
Back to Contents Page
BIOS).
Hide quick links:
Advertisement
Table of Contents
