Dell Inspiron Zino Service Manual page 19

3. Align the tabs on the drive bay with the slots on the chassis. Slide the drive bay to align the screw holes on the drive bay with the screws holes on the
system board.
4. Replace the two screws that secure the drive bay to the system board.
5. Replace the screw that secures the power-button bracket to the drive bay (see
6. Replace the optical drive (see
7. Replace the top bracket (see
8. Replace the top cover (see
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
9. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
Replacing the Optical Drive).
Replacing the Top Bracket).
Replacing the Top Cover).
Replacing the Power-Button Bracket).