Replacing The System-Board Shield; Procedure; Post-Requisites - Dell Inspiron 20 3000 Service Manual

Replacing the system-board
shield
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Align the slots on the system-board shield with the ports on the system board
and place the system-board shield on the display-assembly base.
2 Align the screw holes on the system-board shield with the screw holes on the
display-assembly base.
3 Replace the screws that secure the system-board shield to the display-assembly
base.

Post-requisites

1 Replace the back
2 Follow the procedure in step 4 in
3 Replace the stand.
48
computer. After working inside your computer, follow
After working inside your
cover.
"Replacing the optical
computer. For more safety best
www.dell.com/
drive".
Before