Dell Inspiron Zino Service Manual page 42

Memory Speed
Memory Technology
Main
Service Tag Setting
System Time
System Date
SATA-0
SATA-1
eSATA-0 (applicable for Inspiron 400 computer
only)
eSATA-1 (applicable for Inspiron 400 computer
only)
Keyboard Errors
Advanced Settings
Inspiron 300
CPU Feature
Integrated Graphics Configuration
Integrated Peripherals Configuration
Inspiron 400
CPU Feature
Integrated Graphics Configuration
Integrated Peripherals Configuration
USB Device Setting
Numlock Key
Fast Boot
Power Management
ACPI Suspend Type
AC Recovery
Low Power Mode (applicable for Inspiron 400
computer only)
Remote Wake Up
Auto Power On
Auto Power On Date (Displays only when "Auto
Power On" is set to Enabled)
Auto Power On Time (Displays only when "Auto
Power On" is set to Enabled)
Security Settings
Unlock Setup Status
Supervisor Password
Indicates the memory speed in MHz
Indicates the type of installed memory
Displays the service tag of the computer if the service tag is present or provides a field to input the
service tag manually when the service tag is absent
Displays current time in hh:mm:ss format
Displays the current date in mm/dd/yy format
Displays the SATA drive connected to the SATA-0 connector
Displays the SATA drive connected to the SATA-1 connector
Displays the eSATA drive connected to the eSATA-0 connector
Displays the eSATA drive connected to the eSATA-1 connector
Displays keyboard errors when set to Report
Default is Report
Limit CPUID Value—Enabled or Disabled (Disabled by default)
l
CPU XD Support—Enabled or Disabled (Enabled by default)
l
Hyper-Threading Technology—Enabled or Disabled (Enabled by default)
l
Virtualization (Hidden if CPU is not supported)—Enabled or Disabled (Enabled by default)
l
DVMT Mode Select—DVMT Mode
l
DVMT/FIXED Memory—128 MB
l
Onboard Audio Controller—Enabled or Disabled (Enabled by default)
l
Onboard LAN Controller—Enabled or Disabled (Enabled by default)
l
Onboard LAN Boot ROM—Enabled or Disabled (Disabled by default)
l
Secure Virtual Machine Mode—Enabled or Disabled (Enabled by default)
l
AMD Cool 'N' Quiet—Enabled or Disabled (Enabled by default)
l
UMA Frame Buffer Size—Auto, 32 MB, 64 MB, 128 MB, 256 MB, or 512 MB (Auto by default)
Onboard SATA Controller—Enabled or Disabled (Enabled by default)
l
SATA Mode—ATA or AHCI (AHCI by default)
l
Onboard Audio Controller—Enabled or Disabled (Enabled by default)
l
Onboard LAN Controller—Enabled or Disabled (Enabled by default)
l
Onboard LAN Boot ROM—Enabled or Disabled (Disabled by default)
l
USB Controller—Enabled or Disabled (Enabled by default)
l
USB Operation Mode (Appears when "USB Controller" is enabled)—FullSpeed or HiSpeed
l
(HiSpeed by default)
On or Off (On by default)
Enabled or Disabled (Enabled by default)
Specifies the suspend type
Default is S3
Power Off, Power On, or Last Power State (Off by default)
Enabled or Disabled (Enabled by default)
Enabled or Disabled (Enabled by default)
Enabled or Disabled (Disabled by default)
Specifies the power on date
Default is 15
Specifies the power on time
Default is 12:30:30
Unlocked
Status of supervisor password installed