4. Using a hex nut driver, replace the two screws that secure the VGA connector to the I/O bracket.
5. Replace the chassis fan (see
6. Replace the I/O bezel (see
Replacing the I/O
7. Replace the top bracket (see
8. Replace the top cover (see
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
9. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
Replacing the Chassis
Fan).
Bezel).
Replacing the Top
Bracket).
Replacing the Top
Cover).